DonΓÇÖt hit the road without a full-size spare! Rough CountryΓÇÖs Rear Tire Carrier Spacer gives your Jeep Wrangler the ability to carry a larger aftermarket tire and wheel on the rear of your vehicle. This easy-to-install design fits any tire/wheel combo up to 33-inches,...

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs. Easy bolt-on installation.\ Increased ground clearance.\ Allows springs more movement...

Ready to lift your 2012-up Jeep JK? Rough Country's JK Exhaust Extensions are a crucial component to lifting new model Wranglers 2in or more. These easy to install spacers are fitted between the head-pipe and cross-pipe flanges, effectively moving the exhaust rearward toward the...

Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. These links have two hole adjustments and accommodate all 4in & 6in lifts. Easy bolt-on installation\ 2-hole adjustment...

This bracket relocates the brake pump canister on the frame rail to allow clearance for our winch bumper to be installed. Required on 2012-2018 JK Wrangler models with front winch bumper (#1054) and front hybrid stubby bumper (#1059) & (#1062). Easy bolt-on installation

Constructed from 1/4in steel the Rough Country differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 35 axles. Easy bolt-on installation\ Protects your differential from off-road hazards.\ Highly durable - constructed from 1/4in steel.

This double cardan style CV drive shaft is recommended for 87-93 Jeep YJ Wrangler models equipped with 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. Collapsed Measurement: 17.375-inches\ Extended Measurement: 20.875-inches\ After lifting your Jeep YJ Wrangler a...

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs. Easy bolt-on installation.\ Increased ground clearance.\ Allows springs more movement...

This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an...

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is...

This kit is used to lower the upper and lower control arm mounting points when the XJ Cherokee is lifted at least 4.5in. Lowering the control arm mounting points reduces the arms angles and substantially improves ride quality and handling. Easy bolt-on installation.\ Reduces...

Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use. Easy bolt-on installation\...

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs. Easy bolt-on installation.\ Increased ground clearance.\ Features rounded corners to...

This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. Collapsed Measurment: 15.125-inches\ Extended Measurment: 18.625-inches\ After lifting your Jeep TJ Wrangler...

This double cardan style CV drive shaft is recommended for Jeep XJ Cherokee models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. Collapsed Measurement: 31.75-inches\ Extended Measurement: 35.25-inches\ After lifting your Jeep XJ Cherokee...

Keep your stabilizer out of harm's way quickly and easily with Rough Country's new JK Stabilizer Relocation Bracket. This innovative bracket moves the stabilizer from its original location below the axle tube, to a protected location above and behind the steering link. Mounting your...

Run your rear coils at the right angle; these shims correct the rear coil angle of a lifted JK by 10 degrees, thus putting them at the optimum angle for on and off-road applications. A bowed coil spring can rub against the track-bar bracket...

Fine-tuning the rear suspension travel of your Jeep XJ has never been easier, thanks to Rough Country's Jeep XJ Shackle Relocation Kit. Featuring a set of frame brackets and shackle brackets, this kit relocates the stock shackle positioning, preventing it from bottoming out against...

This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. Collapsed Measurement: 14.25-inches\ Extended Measurement: 17.75-inches\ After lifting your Jeep TJ Wrangler...

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is...