Polaris Slingshot Loaded Rear Sealed 10" Subwoofer Enclosure | Fits Either Passenger or Driver Side | 2015 - Current
Polaris Slingshot Loaded Rear Sealed 10" Subwoofer Enclosure | Fits Either Passenger or Driver Side | 2015 - Current
Product Overview
Sealed 10" Subwoofer Enclosure for Polaris Slingshot (2015-Up) with EXL-X10.4D
The SLG-RSUB10XLLD turns your Polaris Slingshot's rear storage compartment into a low-end powerhouse. Preloaded with DS18’s EXL-X10.4D, this sealed enclosure is made to match factory styling and deliver massive bass!
Seamless Install
Designed specifically for 2015+ Polaris Slingshot models, this enclosure drops into the driver or passenger rear storage compartment using OEM bolt locations. It comes preloaded, prewired, and ready for your aftermarket amplifier.
Maximum Punch
With a final load of 2 Ohms and power handling of 850W RMS (1700W MAX), the EXL-X sub slams hard in the tight 0.54 ft³ sealed enclosure. Damping materials and premium ¾” MDF construction ensure clean response and tight control at any volume.
Engineered to Outperform
The SLG-RSUB10XLLD is finished in a rugged black bed liner coating to blend with factory plastics while holding up to sun, heat, and moisture. RGB-ready wiring is built in, so you can add lighting effects using DS18’s optional RGB controller for a full custom vibe.
Give your Slingshot the bass it was missing—the SLG-RSUB10XLLD installs clean, produces insane power, and is made for real riders.
Key Features
- Includes EXL-X10.4D 10” Subwoofer
- 850W RMS / 1700W MAX Power Handling
- OEM-Fit for Polaris Slingshot 2015 and Newer
- Compatible with Driver or Passenger Side Install
- Sealed Enclosure Tuned for Tight, Responsive Bass
- Includes All Mounting Brackets and OFC-Tinned 6-Core Wiring
Specifications
| Speaker Size | 10" / 254mm |
|---|---|
| Total Impedance | 2 Ohms |
| Total RMS Power Handling | 850W |
| Total MAX Power Handling | 1700W |
| Sensitivity (1w/1m) | 91dB |
| Frequency Response | 35-200Hz |
| Recommended Low-Pass Crossover | 120Hz |
| Wiring / Connections | 6 core OFC Tinned (SPK+RGB) |
| Bracket included for Polaris Slingshot | Yes, all hardware included |
| OEM Fitment | Yes, uses factory bolt locations |
| Compatible Model Years | 2015-Up |
| Speaker Model | EXL-X10.4D |
| Voice Coil Diameter | 2.5" / 63.5mm |
| Voice Coil Former Material | Black Aluminum |
| Winding Material | SV |
| Cone Material | Non Pressed Paper + Glass Fiber |
| Dust Cap Material | PPI |
| Surround Material | Foam |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 2x90oz |
| Internal Volume | 15.3L / 0.54 ft3 |
| Load Configuration | Parallel |
| Box Type | Sealed Box |
| Box Material | 3/4" MDF |
| Finish Material | Black Bed Liner Paint |
| -3Db Dropping Point (F3) | 60Hz |
| Overall Height | 18.7" / 477mm |
| Overall Width | 15.3" / 388mm |
| Overall Depth | 14.3" / 364mm |