Dual Amp 1/0 AWG Dual Amp Wiring Kit
Overview1/0 gauge complete power, ground and signal installation kit for two amplifiers.Features 1/0 AWG (53.5mm2) 4,704 strands...
- $559.99
- $559.99
- Unit price
- per
Subtotal:
$559.99
Couldn't load pickup availability
25 in stock
Overview
1/0 gauge complete power, ground and signal installation kit for two amplifiers.
Features
- 1/0 AWG (53.5mm2) 4,704 strands
- Includes appropriate wire termination hardware
- 4 AWG (21.1mm2) 1,862 strands
- 16 AWG (1.31mm2) 65 strands
- Full Spec Cable meets or exceeds AWG (American Wire Gauge) requirements
- Cables use 100% pure crystal-oxygen free copper (PC-OFC)
- 1 Year Warranty
Technologies
- CTA-2015: Rockford Fosgate cables conform to the CTA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
- Includes Power Wire: This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
- Includes Fused Dist.: This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient location.
- Includes Speaker Wire: This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.
- Includes RCA Cables: This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.
- Dual Amp Installation: This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.
Specifications
| Fuse Type | ANL |
| Battery PWR/GND Gauge | 1/0 AWG |
| Amplifier PWR/GND Gauge | 4 AWG |
| Speaker Wire Gauge | 16 AWG |
| Fuse Size | 300 Amp |
| Dual Amp Installation Kit | Yes |
Shipping
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Important Notes
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.
Related Products
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
KAOS OFFROAD
Recently Viewed Products
