




Couldn't load pickup availability
DS18 PRO-ZT8
8” Water Resistant Mid-Range Loudspeaker with Built-in Bullet Tweeter and Grill 550W 4-Ohm
Experience earth-shaking sound with the PRO-ZT8: a 2-way mid-range built for accurate reproduction, and full-range power—all packed into a rugged, water-resistant design.
Insane Power
Handling an RMS power of 275W and a MAX power of 550W, the PRO-ZT8 reaches volumes that will take your breath away. With a 4-Ohm impedance for easy installation and an ultra-high sensitivity rating of 98dB, you’re guaranteed powerful output even at lower power levels.
Wide Frequency Range
With an impressive frequency response of 65Hz - 22KHz, the PRO-ZT8 captures every nuance across the entire audio spectrum. The integrated filter refines the balance between frequencies, creating a smooth audio experience every session.
Deep, Impactful Bass
Engineered with a robust ferrite magnet, the PRO-ZT8 generates a deep low-end punch, for immersive bass you can feel. This powerful magnet structure enhances voice coil action for forceful impact you can feel throughout your system.
Bullet Tweeter Power
The built-in bullet tweeter is powered by a high-performance neodymium magnet, delivering crisp, ultra-clear highs efficiently. This tweeter ensures every detail in your music is brought to life.
Protective Grill Included
No need to worry about accidental scuffs or kicks—the rugged grill with cloth shade shields against potential damage, while the water-resistant cone guarantees reliable performance even in damp environments.
Transform your system with the PRO-ZT8 and experience music the way it was meant to be heard!
| SKU | PRO-ZT8 |
|---|---|
| Nominal Diameter | 8" (203.2 mm) |
| Nominal Impedance | 4 ohms |
| RMS Power Handing | 275 Watts |
| Maximum Power Handing | 550 Watts |
| Sensitivity (1w/1m) | 98dB |
| Frequency Response | 65Hz-22KHz |
| Recommended Hi Pass Crossover | 80 Hz |
| Voice Coil Diameter | 1.5" (38.1 mm) |
| Voice Coil Former Material | Kapton |
| Winding Material | CCAW |
| Basket Material | Steel |
| Magnet Weight | 27 oz |
| Cone Material | Water-Resistant Paper |
| Surround Material | Treated Cloth |
| Vas | 12.4021 LTR |
| Xmax | 16 mm |
| Fs | 110 Hz |
| Qms | 3.906 |
| Qes | 0.76 |
| Qts | 0.636 |
| Re | 3.2 ohms |
| Overall Diameter | 214 mm (8.42") |
| Front Mount Baffle Cutout | 181 mm (7.13") |
| Mounting Depth | 91 mm (3.58") |
| Overall Depth | 113 mm (4.44") |
| Product Weight | 5.5 lbs |
| Product Dimensions | 9.5 x 9.5 x 5.5 |
| M/C Weight | 47.5 lbs |
| M/C Dimensions | 19.75 x 20 x 12 |
| M/C QTY | 8 |
| Sold In | Piece |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.














