




Couldn't load pickup availability
The DS18 Hooligan X15 has already been proven to provide top end performance and bass now for 6 years on the streets and in the lanes, hooligans have been a choice of music lovers and competitors alike.
We have taken the Traditional Hooligan and revamped it in our newest revision, the Hooligan X15 High Excursion subwoofer. This model features long throw pole, larger spider, and high excursion surround to lower the FS of the speaker making it louder at subsonic frequencies. This massive sub will be great for high powered music or SPL. A FS of 26 will ensure deep lows down to 20Hz and great punchy bass up around 40hz depending on your box tuning. This subwoofer is rated at 4000w RMS and 6000w Max so your vehicle will require electrical upgrades and large wire.
This sub will be friendly to 4th orders, 6th orders, ported boxes, and large sealed boxes and can be used in most applications that has room for the box. With a 59mm one way XMAX, this sub is sure to pump out extreme decibels with the proper power and box setup. We recommend a tuning of 25-35hz for ported boxes depending on your goals.
If you are looking for extreme bass and massive power look no further than the Hooligan High Excursion line! This Hooligan variant will be sure to start you on your way to high volume hairtricks and massive lows!
Highlights




| SPECIFICATIONS | |
| Nominal Diameter | 15" |
| Nominal Impedance | 1 + 1 Ohm |
| RMS Power Handling | 4000W |
| MAX Power Handling | 6000W |
| Sensitivity (1w/1m) | 87.2 dB |
| Frequency Response | 16Hz - 500Hz |
| Recommended Lo Pass Crossover | 80Hz |
| MOTOR | |
| Voice Coil Diameter | 4" / 99.8mm |
| VC Former Material | Black Aluminum |
| Winding Material | CCAW |
| Cone Material | Non-Pressed Paper |
| Dust Cap Material | Carbon Fiber |
| Surround Material | Foam |
| Basket Material | Aluminum |
| Basket Color and Finish | Sandblasted Black |
| Magnet Material | Ferrite |
| Magnet Weight | 500 Oz |
| Displacement Volume | 9.1L / 0.32 ft3 |
| THIELE & SMALL PARAMETERS | |
| Equivalent Volume | Vas 63.56 L /2.24 ft3 |
| Excursion (one way) | Xmax 59 mm |
| Free Air Resonance | Fs 26 Hz |
| Mechanical Factor | Qms 4.65 |
| Electrical Factor | Qes 0.526 |
| Total Factor | Qts 0.419 |
| Mechanical Mass | Mms 613.54g |
| Mechanical Compliance | Cms 0.024 mm/N |
| BL Factor | BL 16.25 |
| Voice Coil Inductance | Le 2.54 mH |
| Cone Area | 754.77 Cm2 |
| DC Resistance | 0.9 + 0.9 Ohm |
| Efficiency Bandwidth Product | 49.4 |
| MEASUREMENTS | |
| Overall Diameter | 15.56” / 395mm |
| Overall Depth | 13.31” / 338mm |
| Front Mount Baffle Cutout | 14.10” / 358mm |
| Mounting Depth | 11.19” / 284mm |
| Motor Diameter | 9.96” / 253mm |



| SKU | HOOL-X15.1DHE |
|---|---|
| Nominal Diameter | 15” / 381mm |
| Nominal Impedance | 1+1 ohms |
| RMS Power Handling | 4000W |
| MAX Power Handling | 6000W |
| Sensitivity (1w/1m) | 87.2dB |
| Frequency Response | 16-500Hz |
| Recommended Lo Pass Crossover | 80Hz |
| Voice Coil Diameter | 4” / 99.8mm |
| Voice Coil Former Material | Black Aluminum |
| Winding Material | CCAW |
| Cone Material | Non-Pressed Paper |
| Dust Cap Material | Carbon Fiber |
| Surround Material | Foam |
| Basket Material | Aluminum |
| Basket Color/Finish | Gloss Black with Machined Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 500 OZ |
| Displacement Volume | 9.1 L / 0.32 ft3 |
| Equivalent Volume | 63.56 L / 2.24 ft3 |
| Free Air Resonance | 26 Hz |
| Mechanical Factor | 4.65 |
| Electrical Factor | 0.526 |
| Total Factor | 0.419 |
| Moving Mass | 613.54 g |
| Compliance | 0.024 mm/N |
| Bl Factor | 16.25 |
| Voice Coil Inductance | 2.54 mH |
| Diaphragm Area | 754.77 cm² |
| DC Resistance | 0.9+0.9 ohms |
| Efficiency Bandwidth Product | 49.4 |
| Sealed Internal Volume | 35.4L / 1.25ft3 |
| Sealed Box Output Response | 45Hz |
| Ported Internal Volume | 70.8L / 2.5ft3 |
| Port Size *Square (W x H x Long) | 2.47" x 15" x 37" / 62.7 x 381 x 939.8 mm |
| Port Tunning Frequency | 30Hz |
| Ported Box Output Response | 26.5Hz |
| Overall Diameter | 15.56” / 395mm |
| Overall Depth | 13.31” / 338mm |
| Front Mount Baffle Cutout | 14.10” / 358mm |
| Mounting Depth | 11.19” / 284mm |
| Motor Diameter | 9.96” / 253mm |
| Product Weight (lb) | 89 |
| Dimensions L x W x H (Inches) | 17.75 x 17.75 x 16 |
| M/C Weight (lb) | 89 |
| M/C Dimensions L x W x H (Inches) | 17.75 x 17.75 x 16 |
| M/C Qty | 1 |
| Sold in | Single |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.
























