




Couldn't load pickup availability
If you demand the most from your system and equipment and accepts no compromise for power, then the H-KO10 is the amplifier that end-all for all your searches. This Korean Half Bridge Car Audio Amplifier is made with the highest quality components and made for the individual that lives for monstrous hard hitting bass.
With great power comes great responsibility! DS18's new Korean Half Bridge amps are here with MORE power, MORE options, all while coming in a smaller frame.
These amps are designed for serious audiophiles that demand the most wattage for window breaking bass. These competition amps are designed to uphold the highest efficiency all while producing obscene amounts of pure power for your subs.
The H-KO10 is a new 10,000 W RMS offering from DS18 to push a multitude or larger, high power subwoofers to the maximum all while using high quality half-bridge Korean mono block power. Korean amps are traditionally known to be beefier and use the highest quality components compared to their Brazilian full-bridge competitors. Korean amplifier are known to have the least signal to noise ratio of all amplifiers available and have been proven through the ages to perform the best for SPL and extremely loud shirt-ripping bass demos with an outstanding level of efficiency and output.
Highlights




| Class | Class-D / Digital |
| RMS Power @ 4 Ohms | 3500W |
| RMS Power @ 2 Ohms | 5800W |
| RMS Power @ 1 Ohms | 10000W |
| RMS Power @ 0.5 Ohms | 0.67 Ohms * 18000W (Burst Only) *Min Load Admisible |
| Frequency Response | 13Hz-250Hz |
| Signal/Noise Ratio | >88dB |
| Efficiency @ 4 OhmS | 95% |
| Damping Factor | 400 |
| THD % | <0.2% |
| Low Level Input Range | 0.2-6V |
| Selectable X-Over | Fixed LPF |
| X-Over Filter Range | 35Hz-250Hz |
| Bass Boost Range | 0-9dB |
| Bass Boost Frequency | 45Hz |
| Infrasonic Filter | 10-50Hz |
| Phase Selector | 0-180 Degrees |
| Power Input Size | 0GA x 3 |
| Fuse Size | 830A |
| SKU | H-KO10 |
|---|---|
| Class | Digital |
| Amplifier Type | Monoblock |
| Channels | 1 |
| RMS Power @ 4 Ohm/14.4V | 3500W |
| RMS Power @ 2 Ohm/14.4V | 5800W |
| RMS Power @ 1 Ohm/14.4V | 10000W |
| RMS Power @ .67 Ohm/14.4V | 18000W (BURST ONLY) |
| Minimum Impedance | 1-4 |
| Operation Voltage | 8.5 - 16V |
| Frequency Response | 13Hz-250Hz |
| Signal/Noise Ratio | >88dB |
| Low Pass Filter | 35Hz - 250Hz |
| High Pass Filter | 35Hz - 250Hz |
| Subsonic | Yes |
| Subsonic Frequency | 10Hz - 50Hz |
| Efficiency @ 4 Ohm | 95% |
| Damping Factor | 400 |
| THD % | <0.2 |
| Input Sensitivity | 0.2V - 6V |
| X-Over Filter Range | 35Hz - 250Hz |
| Bass Boost Range | 0 - 9dB |
| Bass Boost Frequency | 45Hz |
| Phase Selector | 0 - 180 |
| High Level Input | NO |
| Selectable X-Over | Fixed LPF |
| Speaker Output Size | 8GA |
| Power Input Size | 0GA x 3 |
| Fuse Rating | 830A |
| LED Indicator | Power/Protection/Clipping |
| Protection Circuit | Thermal, Over Load, Dc, Short Circuit, Voltage and Clipping |
| LED Digital Voltmeter | Yes |
| Tiffany RCA Connectors | Yes |
| Cooling Fan | Yes |
| Remote Bass Knob | Yes |
| Strap mode connection | Yes |
| Product Weight (lb) | 30 |
| Product Dimensions L x W x H (Inches) | 30 x 12 x 5 |
| M/C Weight (lb) | 30 |
| M/C Dimensions L x W x H (Inches) | 30 x 12 x 5 |
| M/C Qty | 1 |
| Sold in | Single |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.


















