10" Loaded Amplified Shallow Subwoofer Enclosure 350 Watts Rms
Product Overview DS18 SB10A 10" Amplified Car Subwoofer Shallow Enclosure 700 Watts Subwoofers are a must have...
- $335.95
- $335.95
- Unit price
- per
Subtotal:
$335.95
Couldn't load pickup availability
Instructions:
View Instructions
10 in stock
Product Overview
DS18 SB10A 10" Amplified Car Subwoofer Shallow Enclosure 700 Watts
Subwoofers are a must have for any audio system. Some audio enthusiasts don't have a lot of room for big subs, for example, in single cab trucks. Now we have a option for people craving great bass but don't have much space for it.
The SB10A is a slim 10 inch subwoofer in a sealed box that is powered by a powerful, built in 350w RMS amplifier that is sure to get the bass thumping hard in the minimal space that you have available available in your vehicle.
Highlights
- Strong slim 10 inch sub that is sure to bring pounding bass where there is not much space.
- Compact sealed box made of .6 inch MDF with included built in 350w RMS 700w Max high power amplifier.
- Easy to hook up and integrate with any system with the use of high level inputs or RCA jacks, whichever is easiest for you!
Technical Details
| BOX SPECIFICATIONS | |
| Internal Volume | 12L / 0.42ft3 |
| Load Configuration | Parallel In |
| Box Type | Sealed Box |
| Box Material | 0.59" MDF |
| Finish Material | Non-Woven fabric |
| (-3bB) Dropping Point | 48Hz |
| MEASUREMENTS / MEDIDAS | |
| Height | 13.6" / 345.4mm |
| Width | 16.7" / 424mm |
| Depth 1 | 4.82" / 122.6mm |
| Depth 2 | 7.9" / 201mm |
| SPECIFICATIONS | |
| Speaker Size | 10" / 261mm |
| Total Impedance | 2 ohms |
| RMS Power Handling | 350W |
| MAX Power Handling | 700W |
| Sensitivity (1w/1m) | 83dB |
| Frequency Response | 38Hz-250Hz |
| MOTOR / MOTOR | |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Voice Coil Former Material | Aluminum |
| Winding Material | EISV |
| Cone Material | IPP |
| Surround Material | Rubber |
| Basket Material | SPCC |
| Magnet Material | Ferrite |
| Magnet Weight | 40 Oz |
| AMPLIFIER | |
| Amplifier Class | Digital |
| Amplifier Type | Monoblock Subwoofer |
| Number of Channels | 1 CH |
| Minimum Impedance | 2 ohms |
| Signal to Noise Ratio | 75 dB |
| Efficiency @ 4 ohms | 75% |
| Total Harmonic Distortion (T.H.D) | 0.30% |
| Low Level Input Range | 0.1-0.6 V |
| High Level Input Range | Yes |
| Selectable X-Over RMS a 2 OHMS | LPF Fixed |
| X-Over Filter Range | 50 - 200 Hz |
| Bass Boost Range | 0-6 dB |
| Bass Boost Frequency | 50 Hz |
| Phase Selector | 0-180° |
| Led Indicator | Power - Protection |
| Power Input Terminal Size | 8 GA |
| Fuse Size | 30 A |
| Remote Level Control | Yes |
| Thermal Protection | Yes (75°C / 167°F) |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes / Si (<8v,>16v) |
Key Features
- Subwoofer Enclosure
- 1 X 10" Shallow Mount
- Amplified with Subwoofer Control Knob
- RMS Power: 350 Watts(700 Watts Peak)
- Impedance: 2 Ohm ~ 83dB
- 1/2" MDF with Black Carpet
Specifications
| SKU | SB10A |
|---|---|
| Speaker Type / Size | 10" / 261mm |
| Total Impedance | 2 Ohm |
| Total RMS Power Handling | 350W |
| Total MAX Power Handling | 700W |
| Sensitivity (1w/1m) | 83dB |
| Frequency Response | 38-250Hz |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Voice Coil Former Material | Aluminum |
| Winding Material | EISV |
| Cone Material | IPP |
| Dust Cap Material | N/A |
| Surround Material | Rubber |
| Basket Material | SPCC |
| Magnet Material | Ferrite |
| Magnet Weight | 40 Oz |
| Amplifier Class | Digital |
| Amplifier Type | Monoblock Subwoofer |
| Number of Channels | 1CH |
| Minimum Impedance | 2 Ohm |
| Signal to Noise Ratio | 75 dB |
| Efficiency @ 4ohm | 75% |
| Total Harmonic Distortion (THD) | 0.30% |
| Low Level Input Range | 0.1-0.6 V |
| High Level Input | Yes |
| Selectable X-Over | LPF Fixed |
| X-Over Filter Range | 50 - 200 Hz |
| Bass Boost Range | 0-6 dB |
| Bass Boost Frequency | 50 Hz |
| Infrasonic Filter | No |
| Phase Selector | 0-180 |
| Led Indicator | Power / Protection |
| Power Input Terminal Size | 8 Ga |
| Fuse Size | 30 A |
| Remote Level Control | Yes |
| Cooling Fan | No |
| Voltmeter | No |
| Thermal Protection | Yes |
| Over-Load Protection | Yes |
| DC Output Protection | Yes |
| Short Circuit Output Protection | Yes |
| Voltage Input Protection | Yes (<8v,>16v) |
| Clipping Protection | No |
| Internal Volume | 12L / 0.42ft3 |
| Port Tune Fb | N/A |
| Load Configuration | parallel in |
| Box Type | Sealed Box |
| Box Material | 0.59" MDF |
| Finish Material | NON-Woven fabric |
| -3Db Dropping Point F3 | 48Hz |
| Height | 13.6" / 345.4mm |
| Width | 16.7" / 424mm |
| Depth 1 | 4.82" / 122.6mm |
| Depth 2 | 7.9" / 201mm |
| Gross Single Unit Weight | 15.4Lb / 7KG |
| Single Unit Box Dimensions W x L x H | 480mm x 260mm x 405mm |
| Quantity of Units in Master Carton | 1Pcs |
| Gross Master Carton Weight | 8.5KG |
| Master Carton Dimensions W x L x H | 500mm x 280mm x 425mm |
Manuals & Documents
Shipping
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Important Notes
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.