Dual 8" Marine and Powersports PRO Roll Cage Sound Bar System with Built in LED RGB Lights 500 Watts Rms ( 2 x PRO-HY8.4B Included)
Product Overview DS18 JVOCE8 Marine Roll Cage Sound Bar Tower Sound System with 2 X PRO-HY8.4B Included...
- $719.95
- $719.95
- Unit price
- per
Subtotal:
$719.95
Couldn't load pickup availability
Instructions:
View Instructions
10 in stock
Product Overview
DS18 JVOCE8 Marine Roll Cage Sound Bar Tower Sound System
with 2 X PRO-HY8.4B Included - For Jeep, Boat, Golf Cart and ATV.
As the leaders in Jeep Audio, DS18 is back with the ultimate tower system designed to bring high powered audio to Jeep’s everywhere!
The JVOCE8 Roll Cage Pod encloses two of our loudest water resistant Hybrid Speakers: the PRO-HY8.4B, a high powered speaker with a high intensity driver built into its frame! The inclusion of this high compression horn increases the range of frequencies this speaker reproduces to as high as 20KHz.
The combination of the midrange ferrite motor and tweeter neodymium motor is built specifically to allow them to get louder than your usual tower speakers and perform at a higher rate of efficiency for intense sessions that never end!
The JVOCE8 is designed with extremely durable mold injected plastic to withstand the worst of the elements and outlast any build it’s installed into. The plastic grill helps protect your Hybrid Speakers and has RGB LED’s strung around the inside for easy mood matching!
These Pro Audio speakers can handle RMS Power of 500W, which is about 4 times more than a traditional pod speaker. Traditional water resistant speakers have to make sacrifices for loudness and sensitivity to achieve the waterproof rating, where the JVOCE’s do not.
Mount these speakers almost anywhere with DS18’s highly functional pole clamps for installation onto Roll Bars or Mounting Tubes, or use our Flat Mount for even more mounting options.
LED-BTC SOLD SEPARATELY
Made for light water use, not direct exposure to submersion or pressure washing!
Highlights
- Two water resistant extremely loud PRO-HYBRID 8 inch speakers with built in driver for amazing sound quality and intense volume levels
- Highly durable mold injected plastic tower box mounted through clamps or with included flat mounts
- Built in LED RGB (Controlled Through LED-BTC RGB Controller)
- IP65 Waterproof Rating
Great For
- Jeep Audio
- Marine Audio
- ATV Audio
- Golf Cart Audio
- DIY Projects
Technical Details
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | Dual 8" / 211mm |
| Nominal Impedance | 4+4 Ohms |
| RMS Power Handling | 2X250w |
| MAX Power Handling | 2X500w |
| Sensitivity (1w/1m) | 99dB |
| Frequency Response | 60Hz-20KHz |
| Recommended HI Pass Crossover | 80Hz |
| BODY / FEATURES | |
| Enclosure Material | High density plastic molded with color injected |
| Marine Grade Type | IP65 + UV Protected |
| RGB LED | YES, Around the Grill |
| Grill Type | Plastic ABS injected |
| Pair | NO |
| Clamps | 2 x Die-Cast Flat Bracket for Jeep JL Roll Cage or universal fit, 2 x Tube Clamp Adjustable (2"~3") 360 Degree Rotation Mounting, Buried Wire or Open Wire Mounting Optional, Included NBR Pad And Stainless Hardware (Screws, Stop Washers, Hexagon wrench, Safety Rope, Thread locker Glue) |
| Front Logo | Yes |
| Finish | Matte Black |
| Input Wire | Speaker x 2 (stereo configuration) + RGB Lights |
| WOOFER SPECIFICATIONS | |
| Voice Coil Diameter | 1.5" / 38.6mm |
| Cone Material | Waterproof Paper |
| Surround Material | Cloth |
| Basket Material | Aluminum |
| Magnet Material | Ferrite |
| Magnet Weight | 27 Oz |
| DRIVER SPECIFICATIONS | |
| Voice Coil Diameter | 1" / 25.4mm |
| Type | High Compression Horn |
| Diaphragm Material | Titanium |
| Magnet Material | Neodymium |
| Crossover | 6 dB/Oct Filter |
| Horn Diameter | 3" / 76.2mm |
| ENCLOSURE MEASUREMENT | |
| Overall Width | 19.44" / 494mm |
| Overall Depth | 6.41" / 163mm |
| Overall Height (without Clamp) | 10.11" / 257mm |
Key Features
- Roll Cage Tower Sound Bar System
- 2 x 8" PRO-HY8.4B
- RMS Power: 2 x 250 Watts ~ 99dB
- Impedance: 4 + 4 Ohm
- Ferrite & Neodymium Magnets
- RGB LED Lights ~ Water Resistant IP65
Specifications
| SKU | JVOCE8 |
|---|---|
| Nominal Diameter | Dual 8" / 211mm |
| Nominal Impedance | 4+4 Ohms |
| RMS Power Handling | 2 x 250W |
| MAX Power Handling | 2 x 500W |
| Sensitivity (1w/1m) | 99dB |
| Frequency Response | 60Hz-20KHz |
| Recommended HI Pass Crossover | 80Hz |
| Enclosure Material | High density plastic molded with color injected |
| Marine Grade Type | IP65 + UV Protected |
| RGB LED | YES, Around the Grill |
| Grill Type | Plastic ABS injected |
| Clamps | 2 x Die-Cast Flat Bracket for Jeep JL Roll Cage or universal fit, 2 x Tube Clamp Adjustable (2"~3") 360 Degree Rotation Mounting, Buried Wire or Open Wire Mounting Optional, Included NBR Pad And Stainless Hardware (Screws, Stop Washers, Hexagon wrench, Safety Rope, Threadlocker Glue) |
| Front Logo | Yes |
| Finish | Matte Black |
| Input Wire | Speaker x 2 (stereo configuration) + RGB Lights |
| Voice Coil Diameter | 1.5" / 38.6mm / 1" / 25.4mm |
| Cone Material | Waterproof Paper |
| Surround Material | Cloth |
| Basket Material | Aluminum |
| Magnet Material | Ferrite / Neodymium |
| Magnet Weight | 27 Oz |
| Type | High Compression Horn |
| Diaphragm Material | Titanium |
| Crossover | 6 dB/Oct Filter |
| Horn Diameter | 3" / 76.2mm |
| Equivalent Volume Vas | 10.048L |
| Excursion (one way) Xmax | 9.2mm |
| Free Air Resonance Fs | 135Hz |
| Total Factor Qts | 1.011 |
| Overall Width | 19.44" / 494mm |
| Overall Depth | 6.41" / 163mm |
| Overall Height (without Clamp) | 10.11" / 257mm |
| Gross Single Unit Weight (lb) | 21.5 |
| Single Unit Box Dimensions W x L x H (Inches) | 23.75 x 8.75 x 12.25 |
| Quantity of Units in Master Carton | 2 |
| Gross Master Carton Weight | 45.5 |
| M/C Dimensions W x L x H (Inches) | 24.5 x 17.75 x 14 |
Manuals & Documents
Shipping
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Important Notes
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.