




Couldn't load pickup availability
Buckle up and get ready to feel the rush of crystal-clear sound and bone-shaking bass with DS18’s GEN-X210LD.
Dual 10" Loaded Subwoofer Ported Enclosure With GEN-X104D 1600 Watts RMS
The GEN-X210LD transports you to the front row of your favorite concert, where you can feel the thumping bass in your chest. It's an experience that words can hardly capture but one that you’ll never forget.
With an internal volume of 2.6ft3, the GEN-X210LD creates the perfect environment for your subwoofer to thrive. The port tune (Fb) of 35Hz ensures deep, resonant bass that reverberates through your body. Constructed with 1/2" MDF and finished with black carpet, this enclosure is built to outlast any vehicle it’s installed into.
At the heart of the GEN-X210LD are two of DS18’s GEN-X104D Subwoofer. Crafted with meticulous attention to detail, these 10" powerhouses deliver a thunderous performance every session. Equipped with a 2" voice coil diameter and a black aluminum voice coil former, these subwoofers are built to handle intense power while maintaining exceptional thermal control.
With a dual 2-ohm voice coil configuration, wired in parallel, allowing for a nominal impedance of 4 ohm or 1 ohm, the GEN-X210LD’s design ensures various methods of power distribution and compatibility with a wide range of amplifiers, allowing you to extract every ounce of high quality bass performance from your car audio system. With a total RMS power handling of 800W and a MAX power handling of 1600W, the GEN-X210LD unleashes a surge of energy that will electrify your senses. Feel the bass resonating in your vehicle as you experience the true depth and impact of your favorite music.
Join the ranks of true audiophiles and let the GEN-X210LD become the heart and soul of your car audio system!
Highlights
Great For
| GENERAL | |
| Speaker Type / Size | Dual 10" Subwoofer (GEN-X104D) |
| Total Impedance | 2+2 ohm |
| Total RMS Power Handling | 800W |
| Total MAX Power Handling | 1600W |
| Sensitivity (1w/1m) | 93dB |
| Frequency Response | 25 - 250Hz |
| Recommended Lo Pass Crossover | 120Hz |
| SPEAKER SPECIFICATIONS | |
| Voice Coil Diameter | 2” / 50.8mm |
| Voice Coil Former Material | Black Aluminum |
| Winding Material | SV |
| Cone Material | Paper & Fiber Glass |
| Dust Cap Material | PPI |
| Surround Material | Foam |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 66 Oz |
| BOX SPECIFICATIONS | |
| Internal Volume | 72.6L / 2.6ft3 |
| Port Tune | 35Hz |
| Load Configuration | Parallel |
| Box Type | Front Ported |
| Box Material | 1/2" / 15mm MDF |
| Finish Material | Black Carpet |
| -3Db Dropping Point (F3) | 29Hz |
| MEASUREMENT | |
| Height | 13.78” / 350mm |
| Width | 30.71” / 780mm |
| Depth 1 | 11” / 280mm |
| Depth 2 | 14” / 356mm |
| 2 x 10" Subwoofer | GEN-X104D |
|---|---|
| 1 Dual Ported Vented Box | GEN-X210LD |
| Nominal Diameter | 10" |
| Nominal Impedance | 2 + 2 Ohm |
| RMS Power Handling | 400W |
| MAX Power Handling | 800W |
| Sensitivity (1w/1m) | 90dB |
| Frequency Response | 29-250Hz |
| Recommended HI Pass Crossover | 120Hz |
| Magnet Weight | 66 oz |
| Magnet Material | Ferrite |
| Port Tune | 35Hz |
| Internal Volume | 90.6L |
| Load Configuration | Front Ported |
| Box Material | 1/2" MDF |
| Finish Material | Black Carpet |
| Measurement L x W x H (Inches) | 38.58 x 14 x 14 |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.






