




Couldn't load pickup availability
The GEN-X Coaxial Series is back!
The power, clarity and range everyone who likes it LOUD loves about the GEN-X series returns in an extremely durable steel basket protected by a (PC-ABS) Grill for a speaker that will outlast any vehicle its installed in.
The G5.25Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.
The Mylar Balanced Dome Tweeters included in this coaxial help it achieve the highest range of frequencies possible, while the speaker itself reaches frequencies as low as 50Hz. The 2-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.
These speakers get loud extremely easily with a MAX Power Handling of 135W and RMS Power Handling of 45W.
Order the G5.25Xi for your system to expand your soundstage today!
Highlights
Great For





Download G5.25XI Product Manual ![]()
| GENERAL SPECIFICATIONS | |
| Nominal Diameter | 5.25" / 133mm |
| Nominal Impedance | 4 Ohms |
| RMS Power Handling | 45W |
| MAX Power Handling | 135W |
| Sensitivity (1w/1m) | 84dB |
| Frequency Response | 50Hz-20KHz |
| Recommended HI Pass Crossover | 80Hz |
| Number of ways | 2 |
| Pair or Single | Pair |
| Grill Included | Yes |
| WOOFER SPECIFICATIONS | |
| Voice Coil Diameter | 1" / 25.5mm |
| Voice Coil Former Material | ASV |
| Winding Material | EISV |
| Cone Material | Paper |
| Surround Material | Rubber |
| Basket Material | Steel |
| Basket Color/Finish | Black Matte |
| Magnet Material | Barium Ferrite |
| Magnet Weight | 6.3Oz / 180g |
| TWEETER SPECIFICATIONS | |
| Nominal Diameter | 1" / 25.5mm |
| Voice Coil Diameter | 0.5" / 13.25mm |
| Voice Coil Former Material | ASV |
| Winding Material | EISVM |
| Diaphragm Material | Mylar |
| Magnet Material | Neodymium |
| Magnet Weight | 1.8g |
| SPEAKERS MEASUREMENT | |
| Overall Diameter | 5.13" / 130.4mm |
| Overall Depth | 2.47" / 62.8mm |
| Overall Diameter (With Grill) | 6.38" / 162mm |
| Overall Depth (With Grill) | 2.75" / 69.8mm |
| Front Mount Baffle Cutout | 4.52" / 115mm |
| Mounting Depth | 1.97" / 50mm |
| Motor Diameter | 3" / 76mm |
| SKU | G5.25XI |
|---|---|
| Nominal Diameter | 5.25" / 133mm / 1" / 25.5mm |
| Nominal Impedance | 4 Ohms |
| RMS Power Handling | 45W |
| Maximum Power Handling | 135W |
| Sensitivity (1w/1m) | 84dB |
| Frequency Response | 50Hz-20KHz |
| Recommended HI Pass Crossover | 80Hz |
| Number of ways | 2 |
| Pair or single | Pair |
| Grill Included | Yes |
| Voice Coil Diameter | 1" / 25.5mm / 0.5" / 13.25mm |
| Voice Coil Former Material | ASV |
| Winding Material | EISV / EISVM |
| Cone Material | Paper |
| Surround Material | Rubber |
| Basket Material | Steel |
| Basket Color/Finish | Black Matte |
| Magnet Material | Barium Ferrite / Neodymium |
| Magnet Weight | 6.3Oz / 180g / 1.8g |
| Equivalent Volume Vas | 3.66L / 0.129ft3 |
| Excursion (one way) Xmax | 2.2mm |
| Free Air Resonance Fs | 86Hz |
| Mechanical Factor Qms | 3.5 |
| Electrical Factor Qes | 1.63 |
| Total Factor Qts | 1.1 |
| Moving Mass Mms | 9.15g |
| Compliance Cms | 330mm/N |
| Bl Factor Bl | 3.4 |
| Voice Coil Inductance Le | 151uH |
| Cone Area Sd | 84.5cm2 |
| DC Resistance Re | 3.7 Ohms |
| Mechanical Mass w/o air Mmd | 8.3g |
| Diaphragm Material | Mylar |
| Overall Diameter | 5.13" / 130.4mm |
| Overall Depth | 2.47" / 62.8mm |
| Overall Diameter with Grill | 6.38" / 162mm |
| Overall Depth with Grill | 2.75" / 69.8mm |
| Front Mount Baffle Cutout | 4.52" / 115mm |
| Mounting Depth | 1.97" / 50mm |
| Motor Diameter | 3" / 76mm |
| Tweeter Protrusion | 0.5" / 12.8mm |
| Gross Single Unit Weight | 0.52 KG |
| Single Unit Box Dimensions W x L x H | 185 x 85 x 325mm |
| Quantity of Units in Master Carton | 10 PRS/CTN |
| Gross Master Carton Weight | 14 KG |
| Master Carton Dimensions W x L x H | 450 x 340 x 390mm |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.




















