




Couldn't load pickup availability
The 1400 series 10 is optimized for linear performance and versatility in medium size sealed and vented enclosures and infinite baffle alignments.
Fs 49.730 Hz Qms 7.433 Vas 17.910 l Cms 0.122 mm/N Mms 83.300 g Rms 3.541 kg/s Dia 202.500 mm Sd 322.062 cm² Qes 0.756 Re 7.153 ohm Le 1.857 mH Z 8.584 ohm Bl 15.697 Tm Bl²/Re 34.447 N²/W Qts 0.686 no 0.281 % SPL 86.635 dB EBP 65.815 Nominal Diameter 10in Overall Diameter 10.20in / 259mm Mounting Hole Diameter 8.94in / 227mm Bolt Hole Circle DiameterMotor Outer DiameterMounting Depth 5.04in / 128mm Required Pole Vent ClearanceDriver Displacement 0.044 cu ft / 1.25 l Minimum Sealed Volume cu ft / l net Minimum Vented Volume cu ft / l net* Infinite Baffle Approved * Tune for desired response
Single trunk enclosure:

Dual trunk enclosure:

Single SUV enclosure:

Dual SUV enclosure:

Single truck enclosure:

Dual truck enclosure:

The above designs have been engineered for a "two tier" balance of compatibility: First, between the cabin acoustics of a sedan, hatchback and an SUV, and second, between the two available voice coil configurations, for a total of six balance points. This ensures a linear response and optimal power handling for listening purposes under most circumstances. Please visit our Enclosure Design Service page for custom designs.
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.


