




Couldn't load pickup availability
There’s no better way to pack some punchy BASS in your Polaris Slingshot’s sound system than DS18’s easy to install SLG-UDSD6LD!
The installation of DS18’s LOADED Under Dash Enclosure into your Polaris Slingshot’s sound system significantly boosts the bass reproduced by your sound system through precise stereo imaging and state-of-the-art subwoofers.
This enclosure houses two of DS18’s bestselling ZR6.4D’s: subwoofers that can handle intense power and deliver clean bass you can feel. This sealed enclosure is placed underneath your dash so you can feel the sound reproduced by your subwoofers.
AMPLIFIER REQUIRED FOR POWERING THESE COMPONENTS (SOLD SEPARATELY - NXL-X1000.1D RECOMMENDED)
The SLG-UDSD6LD is also completely protected from damage that could be caused by the Slingshot’s Open Air Design with UV Resistant and Waterproof durable mold injected plastic that’s made to last.
This durable waterproof enclosure also utilizes Coated Metal Brackets for increased resistance against the elements so your components are guaranteed to outlast the vehicle’s you install them in.
There’s no better way to pack some punch in your Polaris Slingshot’s sound system than DS18’s SLG-UDSD6LD!
Highlights
Great For
| GENERAL | |
| Speaker Size | 2 x 6.5" |
| Total Impedance | 1 Ohms |
| Total RMS Power Handling | 600W |
| Total MAX Power Handling | 1200W |
| Sensitivity (1w/1m) | 90dB |
| Frequency Response | 38Hz-200Hz |
| Recommended Lo Pass Crossover | 120Hz |
| SPEAKER SPECIFICATIONS | |
| Voice Coil Diameter | 1.5" / 38.8mm |
| Voice Coil Former Material | Aluminum |
| Winding Material | Copper |
| Cone Material | Non-Pressed Paper |
| Dust Cap Material | PPI |
| Surround Material | Foam |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 50 Oz |
| BOX SPECIFICATIONS | |
| Internal Volume | 0.3ft3 / 8.5L |
| Load Configuration | Parallel |
| Box Type | Sealed |
| Box Material | Polyethylene (PE) |
| Finish Material | Black |
| -3Db Dropping Point (F3) | 42Hz |
| UV Protection | Yes |
| Waterproof Rating | IP65 |
| MEASUREMENT | |
| Overall Height | 6" / 152.4mm |
| Overall Width | 14.6" / 372mm |
| Overall Depth | 7.2" / 183mm |
| SKU | SLG-UDSD6LD |
|---|---|
| Speaker Size | 2 x 6.5" |
| Total Impedance | 1 Ohm |
| Total RMS Power Handling | 600W |
| Total MAX Power Handling | 1200W |
| Sensitivity (1w/1m) | 90dB |
| Frequency Response | 38Hz-200Hz |
| Recommended Lo Pass Crossover | 120Hz |
| Voice Coil Diameter | 1.5" / 38.8mm |
| Voice Coil Former Material | Aluminum |
| Winding Material | Copper |
| Cone Material | Non-Pressed Paper |
| Dust Cap Material | PPI |
| Surround Material | Foam |
| Basket Material | Steel |
| Magnet Material | Ferrite |
| Magnet Weight | 50 Oz |
| Internal Volume | 0.3ft3 / 8.5L |
| Load Configuration | Parallel |
| Box Type | Sealed |
| Box Material | Polyethylene (PE) |
| Finish Material | Black |
| -3Db Dropping Point (F3) | 42Hz |
| UV Protection | Yes |
| Waterproof Rating | IP65 |
| Overall Height | 6" / 152.4mm |
| Overall Width | 14.6" / 372mm |
| Overall Depth | 7.2" / 183mm |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.














