




Couldn't load pickup availability
DS18 GEN-X104DCF
10" Subwoofer with Carbon Fiber Dust Cap and Dual 4-Ohm Voice Coils
The GEN-X104DCF brings real DS18 performance to your daily build. This 10" subwoofer combines high-efficiency output and durable construction for a clean, low-end punch in compact or multi-sub setups.
Serious Power
The GEN-X104DCF delivers 600W RMS and peaks at 1200W. It performs well in both sealed or ported enclosures — for tighter, more accurate bass go sealed: but, if you like it LOUD ported is the way to go.
Proven Build
The non-pressed paper cone is paired with a carbon fiber dust cap for improved stiffness and a sleek, aggressive look. A ferrite magnet (81 oz) and a durable 2" black aluminum voice coil give this sub the muscle it needs to handle any high-performance setups.
Dual 4-Ohm Voice Coils for Wiring Flexibility
Whether you’re wiring to 2Ω or 8Ω, the dual 4Ω coils give you the flexibility to pair with multiple subs or match with a wide range of amplifiers.
Optimized for Daily Bass
With a frequency response of 25–250Hz and a recommended low-pass crossover at 120Hz, this sub is tailored for rich, deep bass response.
Get punchy with DS18’s GEN-X104DCF.
| Nominal Diameter | 10" / 254mm |
|---|---|
| Nominal Impedance | 4 + 4 ohms |
| RMS Power Handling | 600W |
| MAX Power Handling | 1200W |
| Sensitivity (1w/1m) | 92 dB |
| Frequency Response | 25Hz-250Hz |
| Recommended Low-Pass Crossover | 120 Hz |
| Voice Coil Diameter | 2" / 50.8mm |
| Voice Coil Former Material | Black Aluminum |
| Winding Material | SV |
| Cone Material | Non Pressed Paper |
| Dust Cap Material | Carbon Fiber |
| Surround Material | Rubber |
| Basket Material | Steel |
| Basket Color / Finish | Glossy Red |
| Magnet Material | Ferrite |
| Magnet Weight | 81 oz |
| Equivalent Volume | 23.67L / 0.835ft3 |
| Excursion (one way) | 10.5mm |
| Free Air Resonance | 37Hz |
| Mechanical Factor | 5.07 |
| Electrical Factor | 0.76 |
| Total Factor | 0.66 |
| Moving Mass | 140.16g |
| Compliance | 0.13mm/N |
| BL Factor | 9.26 |
| Voice Coil Inductance | 0.38mH |
| Diaphragm Area | 352.99cm2 |
| DC Resistance | 3.2 + 3.2 Ohms |
| Efficiency Bandwidth Product | 48.6 |
| Overall Diameter | 10.37" / 263.5mm |
| Overall Depth | 6" / 152mm |
| Front Mount Baffle Cutout | 9" / 230mm |
| Mounting Depth | 5.4" / 137mm |
| Motor Diameter | 6.1" / 155mm |
Most products ship directly from our vendor warehouses or distributor network. Shipping times can vary depending on the brand, product size, availability, and destination.
Large or oversized items such as lift kits, wheels, tires, bumpers, exhaust systems, and audio enclosures may require additional handling time or freight shipping.
If there is ever an issue with availability, shipping cost, or delivery timing, we will contact you before moving forward with the order.
Returns may be accepted on most new, unused, unopened items within 30 days of delivery. Items must be in original packaging and in resellable condition.
Installed, used, damaged, missing-parts, electrical, special-order, clearance, or custom-built items may not be eligible for return.
Return shipping is normally the customer’s responsibility unless the return is due to our mistake, such as the wrong item being shipped.
Before sending anything back, please contact Kaos Offroad so we can review the order and provide return instructions. Returns sent without approval may be refused.
Some products are vehicle-specific. Please verify fitment before ordering. If you are unsure, contact us with your year, make, model, sub-model, and any relevant details before purchasing.
Original shipping charges, freight charges, and vendor restocking fees may be non-refundable depending on the item and supplier policy.








